Transmission in a Volkswagen Jetta contains a large number of electronic components. It illuminates the "Service Vehicle" light on the dashboard. Clearing the DTC from the TCU's memory resets the transmission and turns off the U600 VW/AUDI Scanner on the dashboard.

1

Shift the Jetta's transmission into park or first gear and turn off the engine. Turn the ignition switch to the "ON" position.

2

Connect the data cable of an automotive scan tool to the Jetta's 16-pin diagnostic data port, located underneath the dashboard on the driver's side of the vehicle. Power on Scanner ET601.

3

Use the arrow keys on the scan tool's main menu to navigate between menu options. Choose "TCU" from the main menu.

4

Select "Clear all current and stored DTCs" from the TCU menu. Wait while the scan tool clears the codes. Disconnect the scan tool from the vehicle and start the engine. Confirm that the "Service Vehicle" light is not on. If the Scanner ET801 light is off, the transmission has been reset.

Notice:

Posted by: obd2tool at 03:11 AM | No Comments | Add Comment
Post contains 223 words, total size 3 kb.

The Chrysler 3.3 engine's performance chip helps ensure the engine is operating at its optimum level. To do this, the chip automatically adjusts things like timing and fuel burn and will increase the horsepower that your engine produces. Performance chips are now standard in most fuel injection engines, so you are improving the engine's performance just by having one fitted. But there are a few things that you can do to improve Porsche Transponder Key even more.

1

Service the engine regularly, either by doing it yourself or at a garage. Keeping the engine running efficiently is vital for good fuel mileage. If you notice the mileage you are getting from the tank suddenly drops, there is a good chance that your filters may be clogged or your engine oil needs replacing. A car should be serviced at least once a year.

2

Choose the time that you drive carefully. Avoid rush hour if at all possible. Sitting in a queue of traffic with the engine idling uses a lot of gas.

3

Drive within the speed limit. Driving at 80 miles per hour uses twice as much gas as driving at 30 miles an hour. Driving at an average of 55 miles per hour generally yields the best fuel mileage.

4

Anticipate what is ahead of volkswagen Transponder Key and avoid braking too hard. Severe use of the brakes uses more fuel that applying them gently.

5

Build up speed slowly if possible when you are approaching a hill. Over-revving not only puts a strain on the engine but uses a lot of gas.

6

Make sure that the tires are pumped up to the correct pressure. Check the owner's manual to see what that level is and check the Ford Transponder Key at least once a month.

Tips & Warnings

If you drive a well-maintained engine sensibly, you will soon see an increase in your fuel mileage.

Posted by: obd2tool at 01:56 AM | No Comments | Add Comment
Post contains 324 words, total size 3 kb.