An anti-lock stopping system (ABS) comes standard of all late-model cars. Whenever you depress the brake pedal rapidly, the ABS pulsates with the stopping system so you don't lock your brakes up. This can help to slow the automobile lower lightly without skidding. In case your ABS indicator light is flashing, it's telling you this product is not presently working and won't engage should you push around the brake abruptly. Resetting the sunshine will resume the VAS 5054A function.

Instructions

Having a Checking Tool

1

Clean round the ABS computer situated underneath the hood. Grime and debris might be triggering the sunshine. Turn the ignition onto test if the solves the issue. Otherwise, turn the ignition off and go to Step Two.

2

Fasten a checking J2534 Pass-Thru tool for your car's computer, like a PGM tester, Actron OBD-II scanner or Hypertech energy programmer) This provides you with a code to point what the issue is.

3

Look the code up inside a shop manual specific for your vehicle. Carry out the needed repair before clearing the code.

4

Go into the obvious code supplied with the tester to totally reset it. Unplugging battery won't obvious the indicator light.

Manual Totally reset

5

Buy a fused jumper wire or service connector adapter package from a car parts store. When you are there, request the sales person which fuses for resetting the sunshine where the information Link Connector (DLC) is in your specific vehicle because this will be different.

6

Locate the DLC in your specific vehicle. This might be underneath the glove box, underneath the driver's side dash or perhaps in the engine compartment through the intake manifold. Make certain your ignition is off.Auto Transponder Key

7

Connect the 2 fuses around the DLC for resetting the service light having a jumper wire or service connector. Turn the ignition on without turning the engine and wait for a ABS light to expensive a few occasions.

8

Press lower around the brake pedal together with your hands. You'll hear a click after which you'll release the brake. Push and release the brake pedal eight occasions within three seconds. The ABS light stop flashing, stay illuminated for just one second then will expensive four occasions to point you've removed the sunshine.

9

Turn the vehicle off and take away the wires and fittings.

Posted by: obd2tool at 02:39 AM | No Comments | Add Comment
Post contains 401 words, total size 3 kb.