Here is the step-by-step tutorial of VW Touran odometer correction with Digiprog 3 v4.94 mileage programmer,
By OBD, Only in 1 5 minute.
Step1:Connect Digiprog iii with W211 via car OBD connector.
Power up Digiprog iii and you see notice information, just say yes.
Then enter password to open main menu.

Old mileage:273322km

Step 2:
Select:COCHE/CARRO ->vw->TOURAN->-2010->TACHO->DIAGDigiprog3

Now the centre control immobilizer indicator start blink. The Odometer Correction Tool Digiprog 3 read out the old odometer.

Enter new odometer value as 177696 and wait a while.

Change VW Touran mileage successfully by Digiprog 3 V4.94! Now new odometer value turn to 177696!

Posted by: obd2tool at 10:09 AM | No Comments | Add Comment
Post contains 111 words, total size 2 kb.

In this mini post,i will instruct how to do PDC-Acustic signal at first led coding by DTS Monaco software. And for DTS Monaco guide,you can check it here TS Monaco Projects

Preparations:

Benz DTS Monaco Software Free Download

How to Install Mercedes Benz DTS Monaco Software

Procedures:

ECU TS_212

1.Choose PTS_212

2.Choose Konfiguration Tonausgabe

3.Change the desired options–>for signal at first led "permante tonausgabe front” & ”permanente Tonausgabe heck”

4.Click kodieren

5.Perfrom a hardreset

https://www.obd2tool.com/blog/2020/02/07/benz-dts-monaco-coding-for-pdc-acoustic-signal-at-first-led/

Posted by: obd2tool at 10:01 AM | No Comments | Add Comment
Post contains 83 words, total size 1 kb.

Recently, one customer got his new Key Programmer XTOOL X100 Pad2 but he is sad to find that this pad can’t work! He uses this pad2 to do BMW Key programming but fail. What happen? Let us find out why and solve this problem.

Here attach an image to express his situation:

Customer: This weekend I tried a Q7 2006 to diagnose the pneumatic shock absorbers the aircraft supports only 5 marked so Jaguar, land rover, Benz and another brand. And my BMW 3 series E91 for DPF system (the fap) because I have the light FAP lit nothing it does not work.

Today I tried to program a key on a Golf 2000 gasoline and I can not, I try to make a BMW e46 it does not work either. I would like to have the procedure to follow !!! Please, thank you in advance

Engineer suggest customer change the menu from "F chassis and E chassis” to "CAS 1-3”

While customer still can’t do BMW key program after using the "CAS 1-3”. And it appears a "Fail to communicate” and a CAS 1-3 using note:

Here are some tips to use XTOOL X100 Pad2:

* Choose the right menu or change the menu when you meet problem programming.
* Update the device to the latest version software.
* If the X100 Pad2 still can’t work after update, you could tap the "Help” on the device to test the device so that the engineer could give you more detail solution.

Posted by: obd2tool at 03:50 AM | No Comments | Add Comment
Post contains 264 words, total size 3 kb.

OneXTOOL X-100 PAD 2 users turned to us that when he tried to tap the car models of X100 Pad2, the error will appear with the note that "fail to load data”. The version of his xtool x100 pad2 app is V3.1.5.

The error shows as below:

Solution：

1. Reset XTOOL X100 Pad2 to factory settings (the reset button is in the setting)

2. delete the file call "XTOOL”in the nand flash

3. Reinstall thekey Programmer Tool XTOOL X100 Pad2 app

Here is the download link of XTOOL X100 Pad2 V3.1.5:

https://mega.nz/#!VKAEHDDD!jejp460R0AANnr_S__q7cFIazW1pIQ_Ja_PNcOSmyRM

Posted by: obd2tool at 03:36 AM | No Comments | Add Comment
Post contains 103 words, total size 2 kb.