Transmission in a Volkswagen Jetta contains a large number of electronic components. It illuminates the "Service Vehicle" light on the dashboard. Clearing the DTC from the TCU's memory resets the transmission and turns off the U600 VW/AUDI Scanner on the dashboard.

1

Shift the Jetta's transmission into park or first gear and turn off the engine. Turn the ignition switch to the "ON" position.

2

Connect the data cable of an automotive scan tool to the Jetta's 16-pin diagnostic data port, located underneath the dashboard on the driver's side of the vehicle. Power on Scanner ET601.

3

Use the arrow keys on the scan tool's main menu to navigate between menu options. Choose "TCU" from the main menu.

4

Select "Clear all current and stored DTCs" from the TCU menu. Wait while the scan tool clears the codes. Disconnect the scan tool from the vehicle and start the engine. Confirm that the "Service Vehicle" light is not on. If the Scanner ET801 light is off, the transmission has been reset.

Notice:

Posted by: obd2tool at 03:11 AM | No Comments | Add Comment
Post contains 223 words, total size 3 kb.

Car remotes for keyless entry and remote start have become one of the essential features on vehicles around the world. These keyless entry remotes provide you with TMS370 Programmer to start your vehicle in cold or hot weather from within your house, to sound your panic alarm to scare people away, to find your car in a parking lot or to pop your trunk while your hands are full.

1

Enter your car with your remote in hand and the vehicle's ignition key. Be sure to close all of the doors and the trunk behind you.

2

Insert your key into the ignition, turn it to the "On" position and return the MaxiDiag PRO MD801 to the "Off" position within five seconds.

3

Repeat the previous step three more times, for a total of four cycles. End the fourth cycle in the "On" position and wait for the locks to sound to indicate the beginning of the programming sequence.

4

Press lock on your remote to program it and wait for the locks to sound again.

5

Posted by: obd2tool at 02:45 AM | No Comments | Add Comment
Post contains 209 words, total size 2 kb.

The return Weapon of Mobile Locksmith Business is a lucrative business that can earn you well over $50,000 a year. The only difference from Locksmith Tools and a locksmith shop business, is that your office and tools are set up in a obd2tool.

There are online and video classes, like the Locksmith Video School, where you receive your own manual and tools for practice in a self-instructed environment. First going to the obd2tool Locksmiths to find a listing and more information concerning locksmith certification.

Then purchase the vehicle you'll be using for your business. You'll want something that is reliable for all weather conditions.Receive a business license by following your state's requirement. The majority of states have a mandatory class which you must take, and you must also fill out all required paperwork. Even though you business will be OBDBook 6830

, you still need to have a home office.

Find out more about receiving a business license by visiting the U.S. Small Business Administration's website (See References).

Next purchasing all of the supplies you need to run your mobile locksmith business. You can find minor supplies at most hardware stores, but for more specialized supplies you'll need to visit a locksmith specialty store. Try to build your business by specializing in all locksmith fields like electric alarm system repair and installation of TMS370 Programmer and handles on doors.

Posted by: obd2tool at 02:10 AM | No Comments | Add Comment
Post contains 311 words, total size 6 kb.

Please make a new one can seem very frustrating if you lose the ignition key to your car. You for whatever reason do not want to hire a locksmith to cut a new Mercury Transponder Key based on your ignition if you've exhausted all your options.There is a way to make a new ignition key.

1

Gather your car's VIN number, vehicle registration and your driver's license.

2

Look for the key code. It should be in your owner's manual if your car was built before 1981. Otherwise, it may be on the sales receipt if you bought your car from a dealer.

3

Pry open the interior side door panel on the driver's side if you have not found the key code yet. You may need to use a screwdriver or a prybar to remove it, depending on the make of your car. The key code should be on the lock cylinder that allows your car door to open and close. Alternately, it may be on a sticker in your glove compartment, or on a piece of paper that was attached to your Mazda Transponder Key when you bought the car.

4

Take your information, including VIN number, car registration, ID and Key Code number to either a locksmith or the dealership where you acquired your car, and they should be able to make a new key for you based on the information you provide. This is a much cheaper alternative to having a locksmith cut a key from your ignition itself.

Tips & Warnings

Posted by: obd2tool at 02:28 AM | No Comments | Add Comment
Post contains 318 words, total size 3 kb.

The Chrysler 3.3 engine's performance chip helps ensure the engine is operating at its optimum level. To do this, the chip automatically adjusts things like timing and fuel burn and will increase the horsepower that your engine produces. Performance chips are now standard in most fuel injection engines, so you are improving the engine's performance just by having one fitted. But there are a few things that you can do to improve Porsche Transponder Key even more.

1

Service the engine regularly, either by doing it yourself or at a garage. Keeping the engine running efficiently is vital for good fuel mileage. If you notice the mileage you are getting from the tank suddenly drops, there is a good chance that your filters may be clogged or your engine oil needs replacing. A car should be serviced at least once a year.

2

Choose the time that you drive carefully. Avoid rush hour if at all possible. Sitting in a queue of traffic with the engine idling uses a lot of gas.

3

Drive within the speed limit. Driving at 80 miles per hour uses twice as much gas as driving at 30 miles an hour. Driving at an average of 55 miles per hour generally yields the best fuel mileage.

4

Anticipate what is ahead of volkswagen Transponder Key and avoid braking too hard. Severe use of the brakes uses more fuel that applying them gently.

5

Build up speed slowly if possible when you are approaching a hill. Over-revving not only puts a strain on the engine but uses a lot of gas.

6

Make sure that the tires are pumped up to the correct pressure. Check the owner's manual to see what that level is and check the Ford Transponder Key at least once a month.

Tips & Warnings

If you drive a well-maintained engine sensibly, you will soon see an increase in your fuel mileage.

Posted by: obd2tool at 01:56 AM | No Comments | Add Comment
Post contains 324 words, total size 3 kb.

The onboard electronic diagnostic system in your vehicle is used to locate problems as Scanner ET601. When the car's engine light comes on, you can use an OBD-II scanner to help find the problem and fix it accordingly. However, you can also use the OBD-II to enhance your vehicle's performance with a good diagnostic tool and relevant, updated software.

1

Use a monitor with the most diagnostic scanning possible to check out the most systems in your vehicle.

2

Find engine knocks, and make sure your ABS brake system is operating correctly. The service codes on the OBD-II scanner can tell you how well use are consuming fuel and how individual cylinders are firing. You can fine-tune your transmission shift points with Scanner ET801, as well as check the voltage coming out of the ignition.

3

Utilize an OBD-II scanner when adding enhancements such as pipes and fuel burners to ensure that you remain within current EPA standards. If you are busted with high emissions, you can receive a hefty fine or lose your license to work on cars.

4

Watch for new power loaders that are coming on the market, which allow you to adjust the parameters in your OBD-II system for greater speed and extra power. Since the OBD-II is sealed in a case, special equipment is required to change the software parameters. Auto manufacturers and after-market providers are constantly working on these upgrades, while trying to maintain responsible emissions standards.

5

Drive your car with JBT CS538Cattached. Use a recording option to save the data collected during the test drive. You can then later go back and look at the results to fine tune your car according to your specifications.

Posted by: obd2tool at 03:17 AM | No Comments | Add Comment
Post contains 294 words, total size 3 kb.

HP's Proliant series of servers are full-featured enterprise machines with slots forMultipurpose Flip Gun and a half-dozen or more RAM cards and hard drives. However, older machines use the IDE (also known as Parallel-ATA) standard for hard drive power and data cables, which means that faster and more capacious hard drives made in the last few years under the SATA standard won't work. However, IDE to SATA converters can give you access to bigger and better drives even in an outdated server housing.

1

Turn the server off. Remove all power and data cables from the rear panel. Lift the server onto a clean, sturdy table with the right side facing up. Depending upon your server's configuration and MaxiDiag PRO MD801, you may need help to lift it off the ground.

2

Remove the thumbscrews from the right side of the back panel. Place the screws in a bag or cup for safekeeping. Slide the right access panel off the server and set it aside.

3

Remove the power and data cables from one or both system drives. Use your screwdriver to remove the screws holding the hard drive in place. Depending upon your server's configuration, you may need to flip the case over and remove the opposite access panel to access all the mounting screws. Pull the jbt cs538d car diagnostic tool or drives out of the case.

4

Attach the SATA converters to your back of your new drive or drives. The 4-prong power converter attaches to the large plug, and the large ribbon converter attaches to the smaller plug.

5

Insert the new drive or drives into the server and screw them into the drive mounts. Attach the power and data cables (the same ones you removed in Step 3) to the converters attached to the drives. Replace the access panels and insert the thumbscrews into the back panel.

6

Place the server back in its Magic Locksmith Tools. Reconnect all power and data cables. Press the "Power" button.

Tips & Warnings

The six hot-swap bays on the front exterior of the ProLiant ML370 use a fixed rail system, and there is not enough free space for IDE-SATA converters. Only the internal drive bays can be safely converted for SATA drives.

Replacing a hard drive also replaces all software and data on the drive. Before replacing a drive make sure that all important data is backed up to a secondary or external drive. If you replace the main system drive, you will need to reinstall and reconfigure your server's operating system.

Posted by: obd2tool at 03:10 AM | No Comments | Add Comment
Post contains 430 words, total size 4 kb.

The Renault Kangoo is a compact van with five doors that is built in various trims, including the Kangoo Express and the Kangoo Fourgon. The Renault Kangoo is manufactured with a remote control Mitsubishi Transponder Key that locks and unlocks the doors of the Kangoo. If the infrared key does not operate properly, it must be programmed. You may program the Kangoo's remote control Transponder Key without the use of any tools.

1

Park the Kangoo on level ground.

2

Turn the Kangoo's ignition to the off position.

3

Push and hold yourMitsubishi Transponder Key at the central door locking button for a few seconds and wait for the driver's door to lock and unlock. The central door locking button is located on the Kangoo's center console.

4

Wait 10 seconds for the Kangoo's immobilizer light to come on.

5

Hold the Peugeot Transponder Key to the driver's door receiver and then push the button on the infrared key two times for the driver's door to lock and unlock.

6

Hold the Kangoo infrared key to the other doors and then push the key's button two times for the doors to lock and unlock.

Posted by: obd2tool at 03:55 AM | No Comments | Add Comment
Post contains 203 words, total size 2 kb.

The Renault Kangoo is a compact van with five doors that is built in various trims, including the Kangoo Express and the Kangoo Fourgon. The Renault Kangoo is manufactured with a remote control Mitsubishi Transponder Key that locks and unlocks the doors of the Kangoo. If the infrared key does not operate properly, it must be programmed. You may program the Kangoo's remote control Transponder Key without the use of any tools.

1

Park the Kangoo on level ground.

2

Turn the Kangoo's ignition to the off position.

3

Push and hold yourMitsubishi Transponder Key at the central door locking button for a few seconds and wait for the driver's door to lock and unlock. The central door locking button is located on the Kangoo's center console.

4

Wait 10 seconds for the Kangoo's immobilizer light to come on.

5

Hold the Peugeot Transponder Key to the driver's door receiver and then push the button on the infrared key two times for the driver's door to lock and unlock.

6

Hold the Kangoo infrared key to the other doors and then push the key's button two times for the doors to lock and unlock.

Posted by: obd2tool at 03:52 AM | No Comments | Add Comment
Post contains 203 words, total size 2 kb.

High Level Competencies

obd2tool E-commerce Co., Ltd. actively participate specification design. Combining this activity with end user projects provide to ourE-commerce Co., Ltd.a high skill level. Our competencies have been recognized thru our successful involvement in ODVA events , allowing us to operate as X431 DIAGUN

Trusted, full featured and independant technology

obd2tool , as an independant E-commerce Co., Ltd.has developed both products & technology solutions. After developing a wide range of X431 DIAGUN

, obd2tool invests in the development of the EtherNet/IP technologies. Major PLC providers choose our technology to embed E-commerce Co., Ltd in their product line, as we provide both Scanner/Adapter and CIP Safety development kits.

Scanner, Adapter development kits and more

obd2tool is providing solution for customers who want to integrate EtherNet/IP connectivity in their products. More than just providing communication, obd2tool product portfolio also includes SKS-3058 Auto EECS, diagnosis software, explicit messaging driver and test tools. Moreover, development kits with advanced features like BDM FRAME with Adapters and modular EDS management are already available

Posted by: obd2tool at 07:57 AM | No Comments | Add Comment
Post contains 342 words, total size 4 kb.

Mercedes continues to be among the premier producers of luxury automobiles in Europe and also the U . s . States. Founded in 1901, Mercedes can also be the earliest automobile company around today. Like other care producers, these automobiles will have mechanical and electrical problems every once in awhile. Mercedes uses specific diagnostic equipment to determine the problems at hands.

Auto Scan Tool

Every automobile manufacturer that sells automobiles within the U.S. needs to have sensors that monitor pollutants and meet certain Environmental protection agency pollutants needs. Since these sensors are supervised with a computer, Mercedes includes a Locksmith Tools that scans the pc system for calculated errors once the vehicle is introduced set for maintenance or issues. A car scan from the automobiles computer informs the specialist any potential problems and could have the ability to limit certain problems without extensive and pricey inspection.

Digital Inspection Camera

Digital inspection camera is an extremely helpful tool for checking the engine and transmission, as it features a flexible cable having a camera around the finish that sends the look to your camera for viewing. This is extremely advantageous to prevent needing to dismantle needless repair products and also to discover the reason for any difficulties with the Auto Repair Software or X-100+ Auto Key Programmer.

Current Meter

Posted by: obd2tool at 07:09 AM | No Comments | Add Comment
Post contains 263 words, total size 3 kb.

By 2010, diagnostic testing in cars had developed to some extent where an aftermarket repair specialist can access a variety of data points that permit him to rapidly pinpoint an issue with an automobile throughout a diagnostic test.

History

In 1996, the U.S. Environment Protection Agency needed that automobiles offered within the U.S. make use of the same computer interface, known as On-Board Diagnostics, version II, for tests. Repair specialists may use sophisticated scan Locksmith Tools to check on an automobile's computer, that is given information from many sensors for areas of the engine.

Features

Every vehicle produced in the U . s . States after 1996 includes a plug-in connector that connects to some computer that may read a diagnostic trouble code saved through the vehicle whenever a problem continues to be detected.

Factors

Vehicle proprietors may also purchase home diagnostic handheld Locksmith Tools which use exactly the same diagnostics interface like a service specialist, permitting an automobile owner to look for the reason for a "check engine light" problem as well as do an X-100+ Auto Key Programmer.

Posted by: obd2tool at 09:13 AM | No Comments | Add Comment
Post contains 184 words, total size 2 kb.

Ford stored the Escort alive from 1981 with the 2000 model year and lastly took it off from the selection in 2001. Within the 2000 model year, Ford launched the Escort's alternative -- the main focus. The main focus had more contemporary and aggressive styling, using its hard body lines and exaggerated car headlights. In 2005, Ford remodeled the main focus, giving a far more refined look. The 2005 Focus came standard having a passive anti-thievery system (PATS for brief), which used a transponder key to deliver an indication that permitted the vehicle to begin. When obtaining a new key, the key requires programming before it may become functional. The Toyota Transponder Key has two programming processes: one using two pre-designed secrets and the other utilizing an on-board diagnostics II tool.

With Two Designed Secrets

1

Place the very first designed key within the ignition and switch the key towards the "Run" position for just one second, turn the ignition to the "Off" position and take away the key.

2

Place the 2nd designed key within five seconds of getting rid of the very first key, and switch the ignition towards the "Run" position. Turn the key towards the "Off" position after one second within the "Run" position and take away the key.

3

Place the unprogrammed Lexus Transponder Key in to the ignition within ten seconds of getting rid of the 2nd designed key and switch the key towards the "Run" position for just one second. Turn the key towards the "Off" position and take away it.

4

Place the recently-designed key and try to start the main focus. If it doesn't start, repeat Steps 1 through 3.

5

Repeat Steps 1 through 4 for just about any additional unprogrammed secrets.

Without Two Designed Secrets

6

Place the unprogrammed key within the ignition and switch it towards the "Run" position.

7

Switch on the OBD-II diagnostic oral appliance direct it towards the "Security Access" function. Wait roughly ten minutes using the key within the "Run" position for that OBD-II tool to gain access to the safety system.

8

Choose "Ignition Key Code Program" in the "Security Access" program. Wait for a OBD-II scanner to verify the programming from the key.

9

Turn the ignition off and try to start the automobile. When the vehicle doesn't start immediately, take away the Rover Transponder Key and repeat Steps 1 through 3.

10

Repeat Steps 1 through 4 for just about any other unprogrammed secrets.

Posted by: obd2tool at 03:38 AM | No Comments | Add Comment
Post contains 421 words, total size 3 kb.