August 29, 2019

How to install DRB3 emulator for Chrysler, Jeep, Dodge from 1998 to 2007 year?

Here are steps to install DRB3 emulator for Chrysler diagnosis and programming.

 

DRB3 emulator download link:

https://www.obd2tool.com/blog/2019/08/01/free-download-drb-iii-emulator-for-chrysler-diagnostic-tool-v17-04-27-witech-micropod-2/

 

DRB III Emulator definition:

DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007.

 

Installation Notes:

In order to install the Enhanced DRB III Emulator, you must have the wiTECH Diagnostic Application (wiTECH 1.0) installed as well as all supporting software.

 

The wiTECH 1.0 can be downloaded and installed on a Windows PC from DealerCONNECT (DealerCONNECT > Service > wiTECH Information (Under the SERVICE TOOLS & EQUIPMENT section) > Legacy Tools > wiTECH Software Installer).

 

In order to install DRB III Enhanced Emulator you must have a microPod II Device that has Entitlements for the Enhanced version. This is different that those for the wiTECH Diagnostic Application (wiTECH 1.0) or the Original DRB III Emulator. This microPod II Device will only work with the wiTECH Diagnostic Application (wiTECH 1.0) and Enhanced DRB III Emulator.

 

Steps to DRB3 Emulator on Win7/Win10:

  1. Connect the microPod II device that will be used with Enhanced DRB III Emulator to a Windows computer that has the wiTECH Diagnostic Application (wiTECH 1.0) either through the USB-microUSB cable or by plugging the microPod II device into a vehicle’s OBDII port and having both the Micropod II device and the computer on the same wireless network.

 

  1. Use the following link to add a wireless profile to the microPod II, if not already done: https://kb.fcawitech.com/article/330/how-to-configure-wireless-settings-on-a-micropod-ii-setup-for-enhanced-drb-iii-emulator-832.html

 

  1. Open the wiTECH Diagnostic Application (wiTECH 1.0) and look for the microPod II device in the connection wizard.

 

  1. In the example below, the microPod II device name is "wiTECH 1.0 microPod.” It has been discovered over Wi-Fi and USB.

图片1

 

  1. Once the device is found in the connection wizard, click on the name.

 

  1. Clicking on the name will cause the "Launch DRB III Enhanced” button to appear to the left of the "Next” button in the bottom right corner.

 

  1. If the button appears with "Launch DRB III” with no "Enhanced”, you will need to contact the Help Desk to get the Enhanced entitlements added.

图片2

  1. Click the "Launch DRB III Enhanced” button and accept the EULA that is presented. A warning will be presented indicating that Enhanced DRB III Emulator is not installed. Press "OK” to start the installation process.

图片3

  1. The wiTECH Diagnostic Application (wiTECH 1.0) will now close and the "Enhanced DRB III Emulator Stub” will begin to install. Follow through any dialog prompts to continue the installation.

图片4

10.With the "Enhanced DRB III Emulator Stub” installed, select the check box for "Enhanced DRB III Emulator Application vx.xx.xxxx” and click the "Install” button in the bottom right corner of the window.

图片5

11.Follow through any dialog prompts to complete installation. Once installation has completed, open the wiTECH Diagnostic Application and select the microPOD II device using the Connection Wizard. Click the "Launch DRB III Enhanced” to open the Enhanced DRB III Emulator. The emulator will appear as shown below if you are connected to a vehicle.

图片6

Note: You must be connected to a vehicle in order to launch the DRB III Enhanced Emulator.

 

Posted by: obd2tool at 01:35 PM | No Comments | Add Comment
Post contains 531 words, total size 6 kb.

August 20, 2019

LONSDOR K518S Auto Key Programmer same as Lonsdor K518ISE Key Programmer and car list

Lonsdor K518S Key Programmer:

1.Support language: English

2.Update: One key update online ; No Need Token for all cars

3.Support Immobilization Key Programming, dometer adjustment

4.Built-in-in Volkswagen 4th & 5th adapter

5.Built-in Chip & remote detection module.

6.Support car list : http://en.lonsdor.com/html/function

7.Free BMW FEM key programming

8.K518S key programmer is the latest version of Lonsdor, with wider vehicle coverage in key programming, it is customized as the first masterpiece to the overseas market from Lonsdor.

 

With months of preparation and rigorous testing, from the software design to the user experience, it is an epitomize of Lonsdor years of industry experience.

 

Highlight:

1.Lonsdor K518Sis a key programmer for all makes from Europe, America, Asia and China.

2.It can also support odometer adjustment for some makes.

3.Its nice features are built-in Volkswagen 4th 5th adapter & RFID transponder reader / writer

4.Program Toyota/Lexus smart key all key lost via OBD

5.Free BMW FEM key programming (for all keys lost, enter 32-bit ISN code).

6.Lonsdor K518S is specialized on Volvo, Maserati, Ferrari, Lamborghini, Bentley, Nissan etc.support Astra H programming

 

K518 S key programmer Function Description:

Please pay attention to below function description before using the device.

1.Immobilization: immobilizer system diagnosis

2.Odometer adjustment: mileage diagnosis and correction

3.Hardware testing: test if the hardware can function well

4.Adapter: after dismantling, diagnose certain car models

5.Setting: set up basic device information

6.Update firmware: adapter firmware upgrade & update (connect KPROG adapter

7.with OBD test cable and connect K518S with 12V power supply)

8.One key upgrade: click to update to the latest system data

9.Shutdown – turn off the device

 

Cars coverage list for immobilization:

Europe:Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,

Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,

Borgward

America:Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia:Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,

Toyota, Shigaoka Queen

China:Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car

models are included)

 

Odometer Adjustment Car List:

VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…

Note: more high-end cars will be updated very soon.

 

Note:K518S is still under rapid upgrading, more functions and be released soon, please refer to our website www.lonsdor.com foalso you can "One key update” for the latest version by yourse

 

If you like Lonsdor K518ISE better,you can click tthe link to get more information:

https://www.obd2tool.com/goods-6954-Lonsdor+K518ISE+Key+Programmer.html

Posted by: obd2tool at 10:44 AM | No Comments | Add Comment
Post contains 418 words, total size 4 kb.

August 02, 2019

MB STAR C4 C5 mb sd connect software has updated to 2019.07 with Super Engineering Software DTS monaco And Vediamo

Mb star c4 c5 Software list:

  1. DAS 2019.07: the automatically Diagnosis Assistance System
  2. Xentry 2019.07: New software released by Bennz Company after 04/2009 by diagnosis new cars.
  3. WIS net 2018.11:Workshop Information System

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

  1. EPC.net 2018.11:Electronic Parts Catalog
  2. ST Finder art Location Finder options: 2008 and 2016
  3. STARUTILITIES :the movement management system and self-test
  4. SD MEDIA 2014
  5. PL73

9.Engineer Software:DTS monaco V8.14.016 And Vediamo V5.01.01 Support Offline Programming

10.HHT Software for old cars

11.Engineer version Vediamo updated to V5.01.01 ,Engineer version DTS updated to V8.14.016,Upgrade to the latest version of 2019 data

1) Fix the error that Mercedes-Benz DAS cannot directly call WIS

2) Join the DAS sedan smart offline programming

3) Join the 204 DAS stand-alone version, which can be mutated (German), which is more powerful than Vediamo

4) Join DAS special function password-free access PKW and SMART

5) Repair SMART 450, 451, 452, 454 No longer need TAN Caculator, all offline

6) Increase offline EOL and VMAX all LKW, modify truck maximum speed limit

7) Lift the truck NOx TORGUE restriction, do not need FDOK XT calculation code, directly enter, directly cancel the legal speed limit, you can modify without special function

Clear the truck SCR/ADBLUE fault code (MR), do not need FDOK XN calculation code, enter directly

9)Add DAS 212,207 prototyp model

MB SD Connect C4C5 Feather:

1.Support Wireless

2.Xentry Software Version:2019.07

3.Hardware Verison:OS:2.3 CSD:2.11

4.Supported Multi-Language:Deutsch, English, Französisch, Italienisch, Spanien, Portugal, Finnland, Dänemark, Schweden and so on.

5.Including Super Engineer Software:DTS monaco V8.14.016And Vediamo V5.01.01

6.Support Offline Programming

Basic programming set code function:

1.unit for off-line programming

2.a key to off-set code

3.W166, cancel the programmed number of calculation method of urea, one perfect canceled all 166 urea system.

The new c s-series to the factory installed conversion:

4.222, 205 installing fragrance systems

5.2015, paragraph 212, changing traffic light permanently lit

6.212, 204, adding electric ear

7.222 205 HU5 traffic solution for DVD video

8.W164 closed recycling system

9.W205, retro atmosphere lamp

10.205, 222 adding electric ear electric trunk, the trunk kicking function

11.166, how to modify the gateway set up codes

12.166 meters finished degrees Fahrenheit to degrees Celsius

13.US standard maintenance mileage be set to the number of miles

14.164 disabled diesel particle filter regeneration system

15.166 canceled urea

16.205 added electric rear vision mirror

17.HU45 regional Chinese resolve lock

18.W204 W166 foldable rear-view mirror

19.change the 166 on board, display in Celsius

20.W212 disable ECO configurations

21.activate the HOLD function ABR2XT

22.open W22 looked up appears

23.the AMG sports package enabled W212

24.the air bag computer reset factory State W166

25.to increase the brightness of the color instrument cluster s W222

26.22.97g to install the steering wheel shift paddles

27.W221 AMG W216 dashboard style

28.airbag ECU unlock W204 212

29.disabled child seat recognition sensors W221

30.opening rear fog lamps as spare brake lights with W222

31.increasing engine power MED177

 

Mb star Software display:

1

2

10

11

 

12

 

3

4

5

7

8

 

9

 

7

Posted by: obd2tool at 09:27 AM | No Comments | Add Comment
Post contains 541 words, total size 8 kb.

JulHow does Launch X431 V+ HD3 with HD III module Heavy Duty Truck Diagnostic Tool work?

Launch X-431 V+ is a brand new advanced automotive fault diagnostic tool based on Android system. It passes on Launch advantages in automotive fault diagnostic technology, such as wide Car and Truck model coverage, powerful function, abundant special function and accurate test data, etc.

The HD module must work on any of the x431 v plus or pro3 or pad ii account which old customer have purchased before and have been activated by LAUNCH already.

 

As the 3rd generation of heavy-duty module, it works as a vehicle communication interface device, which is used to read the vehicle data and then send it to the X-431 V+ via wireless BT/WLAN communication. The LED indicators enable you to easily identify the working status of the module.

1

 

1 DC-IN power jack: For connecting the power adaptor.

 

2 Diagnostic socket: For connecting the diagnostic cable.

 

3.LED indicators: It is defined as follows:

Vehicle: While communicating with the vehicle, the indicator lights up and flashes. Otherwise, it will not illuminate.

Power: It illuminates solid red when the module is powered on.

BT: Blue indicates the module is working in wireless BT mode.

I/O: It lights up when the module is connected to the diagnostic tool via data cable (Currently disabled and only reserved for subsequent function extension).

Wireless: It lights up when the module works as a wireless hotspot or network adaptor.

 

4.Data I/O port: Currently disabled and only reserved for subsequent function extension.

Second is HD-III module features in BT/WLAN communication.

HD-III module: send the vehicle data to the diagnostic tool via wireless Bluetooth or Wlan

WIFI module:

HLK-RM08K

Frequency range: 2412-2472MHz

Transmit power: 19.29dBm

Wireless BT module:

YG-218M-A2

Frequency range: 2402-2480MHz

Transmit power: 16.62dBm

 

How does X-431 V+ system work?

2

 

Howto connect HD-III module to the vehicle?

3

 

Notes:

  1. For commercial vehicles, refer to the above connection method to proceed.
  2. For passenger vehicles, replace the "Non-16pin connector” with "OBD I adaptor” +"non-16pin connector (for passenger vehicles)”. Other connections shall also apply.

 

X-431 HD III heavy truck module overseas online configuration Software List

No. Software Name Code
1 X431, USA FORD Diagnostic Software diesel X109023737
2 After the X431, heavy card processing system diagnostics software X109023578
3 ASTRA diagnostic software X109020875
4 Benz heavyduty diagnostic software X109020609
5 Bosch diesel diagnostic software X109020750
6 BREMACH diagnostic software X109020876
7 China heavyduty diagnostic Software X109020831
8 Cummins heavyduty diagnostic software X109020611
9 DAF diagnostic software X109020827
10 ERF diagnostic software X109020980
11 FAW Liberation diagnostic software X109020828
12 Foton Auman diagnostic software X109020856
13 FUSO diagnostic software X109020874
14 Hino diagnostic software X109020926
15 Hyundai heavyduty diagnostic software X109020830
16 Isuzu heavyduty diagnostic software X109020612
17 Iveco heavyduty diagnostic software X109020614
18 JAC heavyduty diagnostic software X109020858
19 Mack heavyduty diagnostic software X109022648
20 MAN diagnostic software X109020838
21 OBD heavyduty diagnostic software X109020613
22 SCANIA diagnostic software X109020873
23 Shangchai diagnostic software X109020760
24 Volvo heavyduty diagnostic software X109020610
25 WP diesel diagnostic software X109022656
26 X431, Airbus diagnostic software X109023030
27 X431, ALLISON transmission box diagnosis software X109022055
28 X431, Ashok Rejlander the diagnostic software X109023442
29 X431, Caterpillar heavy vehicles Diagnostic Software X109023660
30 X431, Chai heavy vehicle diagnostic software X109022916
31 X431, Chaoyang Diesel diagnostic software X109021439
32 X431, construction machinery diagnostic software X109021203
33 X431, CREDO heavy vehicle diagnostic software X109021363
34 X431, DETROIT engine diagnostic software X109022057
35 X431, Dongfeng commercial vehicle diagnostic software X109021436
36 X-431, Dongfeng Yufeng diagnostic software X109021497
37 X431, Freightliner heavy-duty truck diagnostic software X109020867
38 X431, full diesel diagnosis software X109021492
39 X431, HD ABS system diagnostic software X109023557
40 X431, hd_goldendragon diagnostic software X109023028
41 X431, hd_international vehicle diagnostic software X109022898
42 X431, HD_TATA diagnostic software X109023808
43 X431, hd_western_star vehicle diagnostic software X109022899
44 X431, heavy truck presentation software X109023652
45 X431, heavy vehicles Jiangling diagnostic software X109023625
46 X431, IRISBUS heavy vehicle diagnostic software X109021293
47 X431, IRIZAR heavy vehicle diagnostic software X109021292
48 X431, NEOPLAN heavy vehicle diagnostic software X109021291
49 X431, Renault diagnostic software for heavy vehicles X109020839
50 X431, SETRA heavy vehicle diagnostic software X109021289
51 X431, SITCAR heavy vehicle diagnostic software X109021290
52 X431, Stannic bavin diagnostic software X109021441
53 X431, Sterling heavy vehicle diagnostic software X109022897
54 X431, Sunlong bus ( SUNLONG ) diagnostic software X109022696
55 X431, sunwin bus ( SUNWIN ) diagnostic software X109022697
56 X431, UD Trucks 2F Nissan Diesel Diagnostic Software X109021018
57 X431, Yang Chai engine diagnostic software X109023543
58 X431, Zhongtong bus ( ZHONGTONG BUS ) diagnostic software X109022705
59 X431,BONLUCK diagnostic software X109021709
60 X431,HD_KENWORTH deagnostic software X109022888
61 Yuchai diagnostic software X109020747

Posted by: obd2tool at 08:44 AM | No Comments | Add Comment
Post contains 780 words, total size 13 kb.

<< Page 1 of 1 >>
47kb generated in CPU 0.0095, elapsed 0.0498 seconds.
32 queries taking 0.0424 seconds, 146 records returned.
Powered by Minx 1.1.6c-pink.