How-to: programming a spare FOBIK key to a 2012 Dodge Caravan using the Autel Maxisys diagnostic scanner.

Note: This procedure is applicable to any Chrysler vehicle using a WIN module and FOBIK style key. Pin Code is required.

Connect Autel MaxiSys with vehicle

Turn on ignition switch

Auto read vehicle information including VIN

Select Diagnostic->Control Unit->Body->WCM/TPMS- Wireless control->Special Function->Program ignition keys or key fobs

This function is to be used when programming a new ignition key or reprogramming an existing.
It will program the WIN functionality along with the Remote Keyless Enter (RKE) functions.
Ignition should be in RNN position while running this function.

Checking for PIN

Autel Maxisys will ask to enter PIN and confirm

Then place a unprogramming ignition key into the ignition. Turn the key to the RUN position and continue.

Programming of ignition Fobik was successful. Continue to program another key, otherwise close the program key procedure. Cycle the ignition key before starting the vehicle.

Test remote control and start vehicle with both keys.

Done.

Hide Comments | Add Comment

2019 SEC-E9 Key Cutting Machine supported key model list, including the clamp, key, cutter as well as feedback.

2019 SEC-E9 cutting machine supported key model list:

Images:

SEC-E9 key cutting machine feedback: GOOD

Feedback 1:

Well thank goodness for the wonderful support got with My sec e9

This cutting Machine is my company’s life holder just started automotive about a year ago and could not afford much I sold my car by this machine and it has paid off from day one I was able start cutting high security key blanks any key really it always cut them perfectly absolutely perfectly. 1 day I woke up and it was cutting wrong I contacted my representative at the sec E9 company Leslie she got an engineer and several other people together for a conference call I showed him the problems I was having they came up with a solution and soon after my machine was up and running again it cuts perfectly every time I love this machine

Feedback 2 and more:

Working fine too.

Works fast, smooth and perfectly.

Here I attach 2 screenshots.

So happy with SEC-E9 key cutting machine:

Hide Comments | Add Comment