To program a Dodge keyless remote, you have to curently have a current designed remote--otherwise the programming will not work. The instructions for programming such key is similar across a lot of Dodge's models. Therefore, try the most typical group of instructions first.

1

Start most abundant in common instructions for programming a Citroen Transponder Key (keyless remote) by pressing the lock button five occasions at two-second times.

2

Place the important thing in to the ignition cylinder and switch it to "Run" quite simply, so far as it'll go without activating the ignition.

3

Wait for a ignition chimes to prevent.

4

Press the "Unlock" button around the working remote (the main one that's already designed) for four to ten seconds.

5

While still holding the "Unlock" button lower, press the "Stress" button for just one second and release both buttons together. To get this done and satisfy the needs in Step Four, you need to be press the "Unlock" button within the four- to 10-second range. The Infiniti Transponder Key will chime to verify that you have joined the programming mode. Complete the next step within thirty seconds of this chime.

6

Press and release the "Lock" and "Unlock" buttons concurrently. Then, press and release only the "Unlock" button. The chime will seem again, verifying that you simply carried out the process properly.

7

Repeat Step Six with every remote.

8

Take away the Fiat Transponder Key in the ignition.

Posted by: obd2tool at 07:39 AM | No Comments | Add Comment
Post contains 249 words, total size 2 kb.