How to set an IP address on SD C4 PLUS DOIP

Setting an IP address on your SD C4 PLUS DOIP is essential for smooth communication and functionality. To set the IP address correctly, follow the steps carefully:

1. Open a local connection

First, open a local connection on your SD C4 PLUS DOIP device. This is usually accessed from the device's control panel or Settings menu.

2. Click on Status

. Once the local connection is established, go to the Status section. This will give you access to the network settings required to configure your IP address.

3. Access the settings.

In the Status section, find the Settings option. Click on it to continue configuring the network settings.

4. Set the IP Address.

In the network settings, find the "IP Address" setting field and enter 172.29.127.35.

5. Select Advanced.

Click the Advanced option to further customize your network settings. This provides additional options for configuring your SD C4 PLUS DOIP device.

6. Configure DOIP address

. Under Advanced Settings, look for the option to add and configure a DOIP address. Click Add to continue the setup process.

7. Configure DOIP IP address

. Under DOIP Address Settings, enter 169.254.0.35 in the field provided.

8. Save Settings

After entering the DOIP IP address, click "Add" to save the settings. Then select "OK" to confirm the changes. Follow any additional prompts or instructions on your device to complete the setup process.

You can follow the steps below to successfully set the IP address of your SD C4 PLUS DOIP device.

Posted by: obd2tool at 06:41 AM | No Comments | Add Comment
Post contains 260 words, total size 2 kb.