Star Diagnosis DOIP MB Star C5 is the update version of SD Connect C4. Mercedes star diagnostic system sd connect c5 supprot DOIP protocol work for new cars.Bellow is the detail guide about how to update DOIP MB Star C5 Softwar To V2021.06.

Tools required:

Xentry_Kit_09_2017.iso（copy to the folder: iodd 2541 _ISO）

U disk with a Windows machine (recommend Bigbaicai WinCE)

IODD 2541 External Encrypted Hard Drive or similar

Panasonic power adapter

MB Star C5

C5 mux in standby mode

connect the Panasonic power adapter to C5

insert IODD 2541 into the USB port on C5

in a standby mode, press "X” and "√” at the same time, then it will pop up "Start Update?”

(if not, it will pop up "Start XENTRY Connect?”. then, when the prompt disappears, it will display "Start Update?”)

When you see "Start Update?”, press "√” and Connect C5 will go into the update mode and IODD 2541 will light up

Press button "5” on IODD 2541 as soon as possible. then, the cross "X” will turn a circle "O”

what’s displayed on C5:

It will take 50-55 minutes to finish the upgrade

The system restarts after installation completes

If your system fail to start, turn offMercedes Star Diagnostic C5 mux and restart again

When C5 starts, take out the hard disk on C5 and install it into the laptop (here: Dell 55220)

Before it, pls install the Windows machine on the U disk

Press F12 when you see the pop-up "F12 Boot Options”

Select USB Storage Device and press "Enter”

Pop up the interface, and select [03] WIN2003 PE Classical

Go to the PE system and create an user account

Posted by: obd2tool at 10:54 AM | No Comments | Add Comment
Post contains 282 words, total size 8 kb.